SOLD! POWERMATIC MODEL 72 14" 7-1/2HP, 3PH, 12/14" TABLE SAW

Rebuilt from the ground up

14 Images. Click on the large image to start the slideshow.

Front View
Motor Side View
Motor Cover, Cord and Plug
4 Inch Dust Port + Portamate PM-3500 Mobile Base
Super Clean Trunnions
New Arbor Assembly
Name Plate-Actually Model 72 Saw
4 Inch Dust Port with Rockler Dust Right Port
Pre-drilled for Standard Stock Feeder Base
New Biesemeyer 48 Inch Fence
New Freud 14 Inch Blade
New Freud 12 Inch Blade
NEW Arbor Nut Wrench
Two Extra MDF Inserts
GENERAL INFORMATION
The Powermatic Table Saw Plate reads Model 74, but it is the equivalent to the Model 72 for the scoring unit and scoring motor have been removed. It has been rebuilt per attached images. The trunnions are like new with no marks or indentations. The tilt and raising mechanisms operate smoothly and effortlessly. It has a USA made 7-1/2HP, 3 Phase Baldor motor and American made Gould magnetic starter. NOTE: The 14" blade remains 5/8" above the table surface at its lowest position while the 12" blade seats below the table top. 

INCLUDES

  • NEW Arbor assembly with bearings. Cost $250.00

  • Slightly Used Freud LU72M014 14", 54 Tooth ATB General Purpose Saw Blade, 1" Arbor. Cost $90.00

  • NEW Freud LU84M012 12", 60 Tooth ATB Combination Saw Blade, 1" Arbor Cost. $90.00

  • NEW Biesemeyer 78-921 48" Table Saw Fence. Cost $250.00

  • NEW Portamate PM-3500 Mobile Base. Cost $150.00

  • NEW Dust Motor Cover. Cost $140.00

  • NEW 1-1/2" Arbor Nut Box Wrench. Cost $20.00

  • NEW 4" Dust port with Rockler's Dust Right® 4" port. Cost $30.00

  • TOTAL for all the NEW items: $1020.00 all of which are included in the price.

  • Biesemeyer rails with 30" to the right cutting capacity.

  • (52" long Powermatic Rails for 50" cutting capacity to the right available for an additional $200.00)

  • Approximately 15', 12/4 Type SO cord with Levitron NEMA L14-20 plug.

  • Three MDF table saw inserts

  • Operation manual.

SPECIFICATIONS

  • Motor/Power: 7-1/2HP, 3PH, Baldor Motor, 208-230/460 Volts, 19-18/9 Amps. Wired for 230V.

  • Table Dimensions: 38" deep x 48" wide

  • Table Height: 35".

  • Arbor Diameter: 1".

  • Saw Blade Diameters: 12" or 14".

  • Blade Tilt (left only): 45°.

  • Max. Depth of Cut 12" Blade: 4-1/8"

  • Max. Depth of Cut 14" Blade: 5-1/8"

  • Max. Rip-Cut to right of Blade: Approximately 24"

  • Max. Width of Dado: 1"

  • Approximate Shipping Weight: 1000 lbs.

  • The above specifications and information are taken from the Powermatic Manual and are deemed accurate but not guaranteed.

  • Download/View Manual (14MB File)

PRICE, TERMS, AND SHIPPING

  • Price is $2500.00 FOB Albuquerque, NM. Freight is additional. Will palletize at no charge.

  • Cash only if picking up.

  • Cashier check or Money Order if shipping. Shipment will be delayed seven business days for the check to clear.

TO ORDER OR FOR MORE INFORMATION

© 2020 by Woodworking Machines Used

Name Plate-Actually Model 72 Saw